Cobb Tuning 2021-2023 Ford F150 Raptor HCT Redline Intake

All of the carbon fiber pieces in this system are constructed of a 3k tow in a 2x2 twill weave pattern with a gloss clear coat. Factory piping from the air-box is replaced with 3" tubing to maximize airflow and coupled with high quality HydroCarbon filter element incorporated into the airflow path of the tubes. A bespoke carbon airbox lid replaces the factory piece and allows installation of our reusable dual-inlet, high flow filter offering 165% additional surface area over stock. Black 4-ply silicone couplers are held in place with black e-coated stainless steel clamps, offering a sleek look and OEM-quality installation.

FEATURES

• 3k Row 2x2 Twill Carbon Fiber Construction
  
• Gloss Clear Coat Finish
  
• Dual Inlet Filter with 165% More Surface Area Versus Stock
  
• OEM-grade HydroCarbon Filter Element
  
• Black Phosphate Coated 304 Stainless Steel Hardware

EMISSIONS

This part is legal under the provisions of EPA’s Anti-Tampering Policy. COBB Tuning has established a reasonable basis (testing results) via SEMA Garage Emissions Certification that verifies that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and EPA’s Anti-Tampering Policy.

NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY EMISSION CONTROLLED MOTOR VEHICLE.

Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending. Once testing is complete with California, and an EO number is issued, this product will be updated to 50-state legal status.

SC-COB01-0011

Sockets 

• 3/8" ratchet
  
• 3/8" 6" extension
  
• 3/8" Socket Swivel
  
• 3/8" 7mm socket
  
• 3/8" 8mm socket
  
• 3/8" 10mm socket
  
• 3/8" 12mm socket

Hand Tools 

• Phillips head screwdriver
  
• Flathead screwdriver

• Aibox Lid 
• Airbox Gasket
• Air Filter
• Passenger Intake Tube 
• Driver Intake Tube 
• Driver Intake Tube 
• (2) Hydrocarbon Trap assembly
• 3" Silicone Coupler
• 4"-3" Coupler
• (2) 3" Angled Coupler
• Intake Tube Bracket
• (4) m6 x 1.0 x12mm Button Head Bolt (Stainless)
• (6) m6 x 1.0 x 16mm Button Head Bolt (Stainless)
• #64 Clamp 
• (2) #52 Clamp 
• (5) #48 Clamp