2017-2022 FORD F-250/F-350 SUPER DUTY 4X4 DIESEL 4.5"/5.5" LIFT Carli BACKCOUNTRY SUSPENSION SYSTEM
2017-2022 FORD F-250/F-350 SUPER DUTY 4X4 DIESEL 4.5"/5.5" LIFT Carli BACKCOUNTRY SUSPENSION SYSTEM
Couldn't load pickup availability
| F250/350 Lift Height | TREMOR Lift Height |
|---|---|
| 5.5″ | 3.5″ |
| Front Travel | Rear Travel |
|---|---|
| 11.3″ | 13.8″ |
| Shock Type | Tire Fitment |
|---|---|
| 2.0″ Remote Reservoir | 37″ x 13.5″ |
Utilizing Carli SPEC 2.0″ Diameter, Remote Reservoir shocks, we’ve developed a tune that delivers all around comfort and ride quality designed for on-road, in town, highway, towing/hauling as well as slow to mid speed off road use. The remote reservoir Carli SPEC 2.0 boasts 6063 Aluminum construction, anodized body for corrosion resistance, 5/8″ hardened steel chrome plated shaft, full serviceability & rebuildability and are built with 1-peice bushings in the 6061 billet rod-ends. These shocks are spec’d with a premium 5WT oil to balance lubricity, consistent damping and the widest available range in temperature variation. We back these with a 1-year warranty, serviced by Carli. More details on these shocks can be found HERE.
The Super Duty Backcountry 2.0 system is designed for people seeking the best ride on and off-road quality on a budget; basically, the Commuter for those that want to have a little dirt-road fun in their 8,500lb truck without losing the on-road ride quality or usability for which the truck was designed. You’re no longer limited to the highway while gravel roads become uninteresting as you can drive them at speed with one hand on the wheel.
The truck will sit 5.5” higher in the front and have more wheel travel thanks to the taller, Progressive Rate Coil Springs. Radius Arm Drop Brackets reset the pivot point and keep the travel linear for the best ride. The front Sway Bar Geometry will need to be addressed with your choice of a Sway Bar Drop Bracket & Carli Extended Sway bar End Link combination or, for those seeking the most possible ride quality, we offer our full replacement Torsion Sway Bar that lightens the most commonly neglected spring rate – the factory sway bar. From the Torsion Sway bar upgrade, one can expect a far more compliant feel and increased articulation with only slightly more body roll. Bump Stop Drops protect the shocks from over-compressing, the Adjustable Track Bar centers the front axle and Stainless Brake Lines firm up braking and ensure there is enough line for the newfound travel. To round off the front end, we include Caster Shims to tighten the steering.
The rear can be outfitted with a replacement Full Progressive Spring Pack (reduces capacity to a “light” ¾-ton) or factory leaf-pack modifying Progressive Add-a-Pack (eliminates the factory block and maintains payload capacity; pairs with a rear bump stop drop). This is where the F250 and F350 are a bit different. Since 2008, the main spring packs on these two trucks is different; the F250 has a lighter rate spring pack (2 main leaf springs) than its 350 counterpart (3 main leaf springs). The F250 Add-a-Pack equipped systems are a nice improvement over stock; the F350 with the Add-a-Pack is still very stiff in the rear as the main pack doesn’t move much unless loaded. We recommend the Full Replacement Leaf Spring packs for both trucks but especially the F350 given the super-stiff factory springs. If you own an F250 built with the Tremor or high-capacity tow package, these are equipped with an F350 rear spring and should avoid the add-a-pack, as well. If capacity is a concern, an aftermarket airbag system should be installed to complement the Full Progressive Leaf Springs to restore the F350 capacity. We recommend a system that will allow the airbags to disconnect from the lower mount during suspension cycling to ensure you’re able to take advantage of all your rear suspension travel. The Full Progressive Leaf Spring Pack will shift the axle slightly forward in the wheel well to ensure maximum tire clearance for a 37” M/T at full compression.
Wheel and Tire: Factory Wheels SHOULD NOT be run with oversized tires. They’re known to rub the radius arm, sway bar and most concerning – Brake Lines. Factory tires and factory wheels will work without issue but we DO NOT recommend running oversized tires on factory wheels. On our 4.5” Ford Systems, we recommend 17”-18” wheels, no more than 9” wide with 5” of backspacing with a 37”, E-Rated Tire. The more rubber, the better the small bump compliance will be at proper inflation pressures. The ride will firm up as you go larger in wheel diameter. For more details, see our article on wheel and tire selection and tire pressures:
Tires and Wheels: How Do They Affect My Ride?
Included in this kit
- DIESEL 4.5"/5.5" BACKCOUNTRY SYSTEM (CS-F45-BC-CS-17) - $3,751.00
Choose your options
Sway Bar
*REQUIRED* - The Backcountry System has been optimized for use with the Torsion Sway Bar; this sway bar upgrade is a HUGE ride quality upgrade. Maintaining the factory sway bar through use of the Sway Bar Drops & Extended Link Kit is only recommended for customers with snow-plows, in-bed campers or who are constantly hauling to the capacity of the truck.
- EXTENDED SWAY BAR END LINK & SWAY BAR DROP BRACKET KIT - 4.5"/5.5" (CS-FELKIT-45-17) - $801.00
- TORSION SWAY BAR KIT - 4.5"/5.5" LIFT WITH END LINKS (CS-FTSB-45-17) - $1,658.00
Rear Leaf Spring (optional)
*REQUIRED* - The Backcountry System has been optimized for use with the Full Progressive Leaf Springs. This system is also compatible with the Progressive Add-a-Packs but there will be a notable ride quality difference on and off-road. Add-a-Packs are NOT recommended for the F350 (or any F250 equipped with the High Capacity Tow or Tremor Package). More information can be found in the description at the bottom of this page.More information is available in the long description at the bottom of this product page. Selecting "NO Rear Leaf Spring Selection" will result in an unknown ride quality and height result as all Carli Systems are optimized to either the Add-a-Pack or Progressive Leaf Springs.
- PROGRESSIVE ADD-A-PACK - 3" LIFT (CS-FPAP-45-17) - $1,339.00
- FULL PROGRESSIVE LEAF SPRING KIT - 3" LIFT (CS-FFSP-17) - $1,948.00
- HD +1000LBS PROGRESSIVE LEAF SPRING KIT - 3" LIFT (CS-FFSP-17-HD) - $2,520.00
Long Travel Airbags (optional)
*OPTIONAL* - Restores Factory capacity to reduced rate Carli Leaf Springs. Provides the best of both ends of the spectrum. Ride on Carli's soft-rate leaf springs when unloaded then air the bags up to level the chassis and support your load! Standard F250 will have 3.5" Axle Tube, High-Capacity Tow Package F250 will have 4". F350 will have 4" and DRW will be 4.5". We ALWAYS recommend measuring your axle before ordering as the above are guidelines and should be confirmed prior to ordering!
- LONG TRAVEL AIRBAGS - 3.5" AXLE TUBE (CS-FLTB-17-35) - $1,225.00
- TREMOR, HIGH CAP TOW & F350 SRW 4X4 LONG TRAVEL AIRBAGS - 4.0" AXLE TUBE (CS-FLTB-17-40) - $1,225.00
- DRW 4X4 LONG TRAVEL AIRBAGS - 4.5" AXLE TUBE (CS-FLTB-17-45) - $1,225.00
Recommended add-ons (sold separately)
Carli offers these upgrades with this kit. Each is listed as its own product in our store:
- Leaf Spring Shackle: FABRICATED LEAF SPRING SHACKLE (CS-FSHACKLE-11) - $282.00
- 2° Pinion Shim: FORD PINION SHIM KIT, 2 DEGREE (CS-FPSKIT-3X2) - $88.00
- Fabricated Radius Arm Option: FABRICATED RADIUS ARMS - 4.5"/5.5" LIFT (CS-FARA-45-05) - $1,672.00
- High Mount Steering Stabilizer: HIGH MOUNT STEERING STABILIZER - STAINLESS STEEL - 2.5" & 4.5" LIFT (CS-FHMSS-17) - $482.00
- Low Mount Steering Stabilizer: LOW MOUNT STEERING STABILIZER KIT - WITH DIFFERENTIAL GUARD (CS-FLMSS-05) - $746.00
- Carrier Bearing Drop: CARRIER BEARING DROP (CS-CARRIERDROP-F) - $73.00
- Light Bar: FABRICATED LIGHT BAR (CS-FLB-17) - $850.00
- Trophy Hitch: FORD TROPHY HITCH (CS-FHITCH-1723) - $3,324.00
Brand: Carli Suspension
Carli Part #: CS-F45-BC20-20-CONFIG
