Skip to product information
1 of 5

BDS 7 Inch Lift Kit w/ Radius Arm | Ford F-250/F-350 Super Duty (2020-2022) 4WD | Diesel

BDS 7 Inch Lift Kit w/ Radius Arm | Ford F-250/F-350 Super Duty (2020-2022) 4WD | Diesel

Regular price $2,719.50 USD
Regular price Sale price $2,719.50 USD
Sale Sold out
Shipping calculated at checkout.
Quantity

Overview

Take your Ford Super Duty diesel truck to the next level with this 7-inch radius arm lift kit from BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 38" tires.

Up front, the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm, and track bar bracket for steering correction, sway bar relocation, brake line brackets, and custom-tuned nitrogen-charged shocks.

At this height, the transfer case needs to be indexed to allow use of the factory front driveshaft, so an indexing ring and new transmission crossmember are supplied. In the rear, this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets, and a matching set of NX2 Nitro or FOX Performance shocks.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific Pro-Ride coil springs is supplied to provide the correct lift height and a smooth, predictable ride across various terrains.

HD Radius Arms

In place of the factory-stamped steel radius arms, BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights, along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

T-Case Indexing

At this height, driveline adjustments are necessary to allow the use of the factory driveshafts, so a precision-built transfer-case indexing ring featuring ARP studs can clock the transfer case and improve the front driveline operating angle. Additionally, a high-clearance transmission crossmember was supplied to allow sufficient clearance.

Important Notes

  1. Ford recommends the replacement of the pitman arm nut after each time it has been removed.
  2. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper.
  3. If your truck is equipped with a factory rear sway bar add: BDS123808
  4. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.
  5. Due to the taller factory ride height, Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models.
  6. Larger tires on the stock wheels are not recommended due to the brake line clearance required. Use recommended specs listed in the wheel and tire fitment section.
  7. The indexing ring is only compatible with 10-speed transmission trucks. Please verify your truck's equipment before installing it. The transfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission.
  8. Indexing Ring has NOT been designed to work on manual shift transfer case models. Modification of the shift cable mount will be required.
  9. Installation requires a torque wrench capable of 405 ft-lbs.
  10. Some trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, BDS recommends having this performed prior to installing the lift.
  11. Fits SRW models only.

Installation

  • Est. Install Time: 6-8 hrs
  • Difficulty: Difficult
  • Specialty Tools: 30mm Socket, Basic Hand Tools, Drill / Bit Set, Jack / Jack Stands, Pitman Arm Puller
  • Installation Guides: Guide 1 (PDF) | Guide 2 (PDF)

Specification

  • Front Lift Method: Coil Spring
  • Front Lift Height: 7"
  • Rear Lift Height: 6"
  • Shocks Included: Yes
  • Lift Height: 6-7.5"
  • Max Tire Size: 38 x 13.5

By option:

  • 6 Inch Block Kit / FOX 2.0 Performance Series (BDS1561FS): Rear Lift Method: Block
  • 6 Inch Block Kit / NX2 Nitro Series (BDS1561H): Rear Lift Method: Block
  • Leaf Springs / FOX 2.0 Performance Series (BDS1562FS): Rear Lift Method: Leaf Spring
  • Leaf Springs / NX2 Nitro Series (BDS1562H): Rear Lift Method: Leaf Spring
  • 6 Inch Block Kit / FOX 2.5 Performance Elite (BDS1992FPE): Rear Lift Method: Block
  • Leaf Springs / FOX 2.5 Performance Elite (BDS1993FPE): Rear Lift Method: Springs

Fitment

  • 2020-2022 Ford F-250 Super Duty - 4WD, Diesel (All trims)
  • 2020-2022 Ford F-350 Super Duty - 4WD, Diesel (King Ranch, Lariat, Limited, Platinum, XL, XLT)
View full details