Skip to product information
1 of 6

BDS 5 Inch Lift Kit w/ Radius Arm | Ford F-250/F-350 Super Duty (2020-2022) 4WD | Diesel

BDS 5 Inch Lift Kit w/ Radius Arm | Ford F-250/F-350 Super Duty (2020-2022) 4WD | Diesel

Regular price $2,398.55 USD
Regular price Sale price $2,398.55 USD
Sale Sold out
Shipping calculated at checkout.
Quantity

Overview

Improve the ride on your Ford Super Duty diesel truck with this 5-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37" tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Important Notes

  1. Ford recommends the replacement of the pitman arm nut after each time it has been removed.
  2. If installed on a truck with a top-mounted overload spring, an overload spacer block taller than 1-1/8" UBT4027 (Qty: 4) is required.
  3. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper.
  4. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.
  5. Due to the taller factory ride height, Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models.
  6. Larger tires on the stock wheels are not recommended due to the brake line clearance required. Use recommended specs listed in the wheel and tire fitment section.
  7. Minor trimming may be necessary for clearance of 37x12.50 tires on certain wheel setups.
  8. Installation requires a torque wrench capable of 405 ft-lbs.
  9. Some trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, BDS recommends having this performed prior to installing the lift.
  10. Fits SRW models only.

Installation

  • Est. Install Time: 6-8 hrs
  • Difficulty: Difficult
  • Specialty Tools: Basic Hand Tools, Die Grinder, Jack / Jack Stands, Pitman Arm Puller
  • Installation Guides: Guide 1 (PDF) | Guide 2 (PDF)

Specification

  • Front Lift Method: Coil Spring
  • Front Lift Height: 5"
  • Rear Lift Method: Block
  • Shocks Included: Yes
  • Lift Height: 4-5.5"
  • Max Tire Size: 37 x 12.5

By option:

  • FOX 2.0 Performance Series (BDS1551FS): Rear Lift Height: 4"
  • NX2 Nitro Series (BDS1551H): Rear Lift Height: 4"
  • FOX 2.5 Performance Elite (BDS1991FPE): Rear Lift Height: 5"

Fitment

  • 2020-2022 Ford F-250 Super Duty - 4WD, Diesel (All trims)
  • 2020-2022 Ford F-350 Super Duty - 4WD, Diesel (King Ranch, Lariat, Limited, Platinum, XL, XLT)
View full details