Skip to product information
1 of 5

BDS 5 Inch Lift Kit w/ 4-Link | FOX 2.5 Performance Elite Coil-Over Conversion | Ford F-250/F-350 Super Duty (2023-2027) 4WD | Diesel

BDS 5 Inch Lift Kit w/ 4-Link | FOX 2.5 Performance Elite Coil-Over Conversion | Ford F-250/F-350 Super Duty (2023-2027) 4WD | Diesel

Regular price $7,533.66 USD
Regular price Sale price $7,533.66 USD
Sale Sold out
Shipping calculated at checkout.
Quantity

Overview

Maximize the capability of your Ford Super Duty diesel powered truck with this 5-inch lift kit with 4-Link and FOX 2.5 Performance Elite Coil-over conversion from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37" tires.

Up front the lift kit includes diesel-specific FOX 2.5 coil-over shocks, 4-link control arms with conversion brackets, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, and brake line brackets.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of FOX Performance shocks.

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength ¼-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

FOX Performance Elite Coil-Over

FOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box, these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The DSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs, offering 10 separate low-speed and 12 high-speed compression levels, with a black anodized aluminum reservoir to increase cooling efficiency.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Important Notes

  1. Ford recommends the pitman arm nut is replaced prior to pitman arm installation.
  2. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper.
  3. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.
  4. Due to the taller factory ride height, Tremor models will not net the full advertised lift height. The final ride height will be the same as standard models.
  5. Larger tires on the stock wheel are not recommended due to the brake line clearance required. Use recommended specs listed in the wheel and tire fitment section.
  6. Minor trimming may be necessary for clearance of 37x12.50 tires on certain wheel setups.
  7. Installation requires a torque wrench capable of 405 ft-lbs.
  8. Some trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, BDS recommends having this performed prior to installing the lift.
  9. SRW Models only
  10. Recalibration of your vehicles Advanced Driver Assistance System (ADAS) cameras, radars, light detection and ranging (LiDAR), and other sensors may be necessary by your local dealership or ADAS service center. This will ensure proper functionality of the vehicle features such as lane keeping, lane departure, parking assistance, blind-spot detection, adaptive cruise control systems, and other functions as they did prior to installation. Please connect with your local dealership or ADAS service center. Similar to a wheel alignment, all charges and expenses that may occur from dealership calibrations and adjustments are the sole responsibility of the vehicle owner.
  11. Vehicles with radius arm mounted ride height sensors will require BDS123303
  12. Vehicles with leaf spring ride height sensors must select the rear block option.

Installation

  • Est. Install Time: 8-10 hrs
  • Difficulty: Difficult
  • Specialty Tools: Cut-off Tool, Pitman Arm Puller
  • Installation Guides: Guide 1 (PDF)

Specification

  • Max Tire Size: 37 x 12.5

By option:

  • Leaf Springs / FOX 2.5 Performance Elite (BDS2248PES): Front Lift Method: Coil-Over; Front Lift Height: 5"; Rear Lift Method: Leaf Spring; Rear Lift Height: 4"; Shocks Included: Yes; Lift Height: 4-5.5"
  • 3 Inch Block Kit / FOX 2.5 Performance Elite (BDS2264PES): Front Lift Method: Coil Spring; Front Lift Height: 5"; Rear Lift Method: Block; Rear Lift Height: 3"; Shocks Included: Yes; Lift Height: 4-5.5"
  • 3 Inch Block Kit / FOX 2.5 Performance Series (BDS2264PPS): Front Lift Method: Coil Spring; Front Lift Height: 5"; Rear Lift Method: Block; Rear Lift Height: 3"; Shocks Included: Yes; Lift Height: 4-5.5"

Fitment

  • 2023-2027 Ford F-250 Super Duty - 4WD, Diesel, SRW (King Ranch, Lariat, Platinum, XL, XLT)
  • 2023-2027 Ford F-350 Super Duty - 4WD, Diesel, SRW (King Ranch, Lariat, Limited, Platinum, XL, XLT)
View full details